Connecting To A Network; Network Connection - Wireless - Samsung 8000 Serie Manual Del Usuario

You can set up your TV so that it can access SMART TV applications through your local area network
(LAN) using a wired or wireless connection.
After you have "physically" connected your TV to your network, you must configure the network
✎
connection to complete the process. You can configure the connection during the Initial Setup
process (see page 16) or after the Initial Setup process, through the TV's menu.

Network Connection - Wireless

You can connect your TV to your local area network (LAN) through a standard wireless router or modem.
The LAN Port on the Wall
This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using
IEEE 802.11n. When you play video over a network connection, the video may not play smoothly.
Most wireless network systems incorporate a security system that requires devices that access the
network through an access point (an AP), a wireless IP router, or wireless modem to transmit an encrypted
security code called an access key.
Your TV is compatible with the following security protocols:
• Authentication Mode: OPEN, SHARED, WPAPSK, WPA2PSK
• Encryption Type: WEP, TKIP, AES
If you select Pure High-throughput (Greenfield) 802.11n mode and the Encryption type is set to WEP or
TKIP on your AP or wireless router, Samsung TVs will not support a connection in compliance with new
Wi-Fi certification specifications.
[PE8000-ZS]BN68-04073B-04.indb 12

Connecting to a Network

Wireless IP Router or Modem
that has a DHCP Server
LAN Cable (Not Supplied)
English - 12
2012-05-11 11:01:23