Samsung 8000 Serie Manual Del Usuario página 22

The product color and shape may vary depending on the model.
✎
The TV's Controller, a small joy stick like button on the bottom left side of the TV, lets you control the
✎
TV without the remote control.
Down(Front)
Left
Up(Rear)
Follow these instructions facing the front of your TV.
✎
When you use a TV camera, you should check whether a tape attached or not in rear of the TV camera, and then you
✎
can use a TV camera after adjust a camera angle. When you don't use a TV camera, we recommend to use after a
camera lens fixes to upwards. In this case, Face recognition and Motion Control functions is not available.
When selecting the function by moving the controller to the up/down/left/right directions, be sure not to
✎
press the controller. If you press it first, you cannot operate it to move the up/down/left/right directions.
Power on
Adjusting the volume
Selecting a channel
Using the Function menu
Selecting the SMART HUB (™) With the Function menu visible, select SMART HUB (™) by moving the
Selecting the MENU (m)
Selecting a Source (s)
Power Off (P)
To close the Menu, SMART HUB, or Source, press the Controller for more than 1 second.
✎
[PE8000-ZS]BN68-04073B-04.indb 22
Using the TV's Controller
Function menu
m R
P
Remote control sensor
When you use the Smart Touch
Control, a standby LED does not
work (except button).
P
Right
Turn the TV on by pressing the Controller when the TV is in standby mode.
Adjust the volume by moving the Controller from side to side when the
power is on.
Select a channel by moving the Controller backwards and forwards
when the power is on.
To view and use the Function menu, press and release the Controller when the
power is on. To close the Function menu, press and release the Controller again.
Controller backwards. The SMART HUB main screen appears. Select an
application by moving the Controller, and then pressing the Controller.
With the Function menu visible, select the MENU (m) by moving the
Controller to the left. The OSD (On Screen Display) Menu appears. Select
an option by moving the Controller to the right. Move the Controller to the
right or left, or backwards and forwards to make additional selections. To
change a parameter, select it, and then press the Controller.
With the Function menu visible, open the Source (s) list by pushing the Controller
to the right. The Source list screen appears. To select a source, move the Controller
back and forth. When the source you want is highlighted, press the Controller.
With the Function menu visible, select Power Off (P) by pulling the
Controller forwards, and then press the Controller.
English - 22
Camera
2012-05-11 11:01:25