Publicidad
Idiomas disponibles
Idiomas disponibles
Packing list
Main unit ×1, A6-15P rotor× 1, Simple user manual x 1
Installation instructions
1. Unpack and place the centrifuge on a solid and flat surface (Laboratory bench space).
2. Ensure good working environment and ambient temperature of 15°C-25°C.
3. Protect the centrifuge from direct sunlight or temperature of higher than 30°C.
4. Place the unit at >10cm distance from other objects to allow good ventilation& performance.
5. Please keep the centrifuge away from heat or water (liquid) and chemicals.
Rotor preparation
1. Prepare the samples to be separated
2. Place samples into the centrifuge tube：The amount of sample should not exceed the allowed
maximum amount set forth in this user manual.
3. Ensure the balanced centrifuge tube
4. Rotor installation and replacement
5. Insert the centrifuge tubes symmetrically onto the rotor in place without imbalance
Publicidad
