EDM Product 08783 Manual De Instrucciones página 13

A weighted sound power level: LwA: 106.5dB(A) ; KwA=3dB(A)
Typical weighted vibration: ah=12.8m/s2 ;
Uncertainty: k=1,5m/s2
POWER TOOL USE AND CARE
• Do not expect the power tool to do more than it can. Use the
correct power tool for what you want to do. A power tool will
achieve better results and be safer if used in the context for which
it was designed.
• Do not use the power tool if the switch cannot turn it on and
off. A power tool with a broken switch is dangerous and must be
repaired.
• Disconnect the plug from the power source before making
adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power
tool accidentally.
• Store power tools, when not in use, out of the reach of children
and do not allow people who are not familiar with the power tool
or these instructions to operate it. Power tools are potentially
dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or jammed
moving parts, breakages or any other feature that might affect
the operation of the power tool. If it is damaged, the power tool
must be repaired. Many accidents are caused by using poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting
tools with sharp cutting edges are less likely to jam and are easier
to control.
• Use the power tool, accessories and cutting tools, etc., in
accordance with these instructions and in the manner intended for
the particular type of power tool, taking into account the working
conditions and the work which needs to be done. Using a power
tool in ways for which it was not intended can lead to potentially
hazardous situations.
SERVICE
Your power tool should be serviced by a qualified specialist using only
standard spare parts. This will ensure that it meets the required safety
standards.
SPECIAL SAFETY INSTRUCTIONS FOR WRENCHES.
• Hold power tools by insulated gripping surfaces when performing
an operation where the cutting tool may contact hidden wiring.
Contact with a live wire will make exposed metal parts of the tool
live and shock the operator.
• Let bit cool before touching, changing or adjusting it. Bits heat up
Instruction manual
ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND CHARGER
1. Immediately rinse with water.
2. In case of eye contact, rinse abundantly with clean water for at least
10 minutes.
3. Consult a physician.
dramatically while in use, and can burn you.
• Maintain labels and nameplates on the tool. These carry important
safety information. If unreadable or missing, contact your supplier
for a replacement.
• Avoid unintentional starting. Prepare to begin work before turning
on the tool.
• Do not lay the tool down until it has come to a complete stop.
Moving parts can grab the surface and pull the tool out of your
control.
• When using a handheld power tool, maintain a firm grip on the
tool with both hands to resist starting torque.
• Do not leave the tool unattended when the Battery Pack is
connected. Turn off the tool, and remove the Battery Pack before
leaving.
Use batteries and chargers applicable to this machine.
BATTERIES
• Never attempt to open for any reason.
• Do not store in locations where the temperature may exceed
40 C.
• Charge only at ambient temperatures between 5 C and 40 C.
• When disposing of batteries, follow the instructions given in the
section "Protecting the environment".
• Do not cause short circuits. If connection is made between the
positive (+) and negative (-) terminal directly or via accidental
contact with metallic objects, the battery is short circuited and an
intense current will flow causing heat generation which may lead
to casing rupture or fire.
• Do not heat. If batteries are heated to above 100 C, sealing and
insulating separators and other polymer components may be
damaged resulting in electrolyte leakage and/or internal short
circuiting leading to heat generation causing rupture or file.
Moreover do not dispose of the batteries in fire, explosion and/or
intense burning may result.
• Under extreme conditions, battery leakage may occur. When you
notice liquid on the battery, proceed as follows:
• Carefully wipe the liquid off using a cloth. Avoid skin contact.
• In case of skin or eye contact, follow the instructions below:
08783
REF.
ES
PT
EN
FR