Ridgid Kollmann SeeSnake KD-200 Color Manual Del Operador página 8

Kollmann
Safety Cables Stainless steel cables (two) within the
spring assembly that connect between the push cable
termination and the locking sleeve holding the con-
nector at the back of the camera head. These prevent
the spring from over-extending when pulling the cam-
era out of a pipe. Together, they provide over 800
pounds of breaking strength.
Sapphire Window The small, round port that the
camera "looks" through. This component is virtually
scratch-proof providing excellent video throughout the
life of the system.
Spanner Wrench One-piece wrench used to engage
the end of the spring when removing the camera
head. To remove the camera from the spring, you
must use a spanner wrench.
Spring Assembly Flexible stainless steel spring and
associated components that hold the camera to the push
cable, provides a flexible transition from camera to push
cable, and protects the terminations within the spring.
Sunshade This metal device is included on
Monitor + VCRs to protect the screen when system is
not in use (closed) and to optimize the picture in bright
sunlight (opened).
Tilt Stand Small kick stand on bottom of Monitor
helps raise the angle of the screen when the monitor is
sitting on the ground for easier viewing.
(Figures 2-11):
Figure 2 – Tilt Stand
6
All manuals and user guides at all-guides.com
SeeSnake ™ Diagnostic Equipment
+ VCR
Ridge Tool Company • Elyria, Ohio • U.S.A.
Reel
Dolly
Brake
Figure 3 – Reel, Front
Axle
Interconnect Cable
Figure 4 – Reel, Back