Quick Start - Temple Touch PREMIUM Instrucciones De Uso

Table of contents:
Safety warnings
Section 1:

Quick Start

Section : measuring guidelines
Section 3: Directions for use
Section 4: Room Temperature Display
Section 5: Using ODPT
Section 6: Setting the operating scale
Section 7: Installing and replacing the batteries
Section 8: About body temperature measurement
Section 9: Troubleshooting and special indications
Section 10: Care and cleaning
Section 11: Technical Information
Section 1: Warranty and Service Information
IMPORTANT! Read Instructions for Use before using the thermometer.
Safety warnings:
1. Keep the thermometer out of the reach of children.
. Do not drop the thermometer or expose to heavy shock. The unit is not shock proof.
3. Do not immerse thermometer in water or any other liquid.
The unit is not water proof.
4. Do not store the unit in direct sunlight, at a high temperature, in high humidity or
dust. Performance of the unit may be degraded.
5. Stop using the thermometer if it operates erratically or if display malfunctions.
6. Clean the thermometer probe before storing (see section 10).
7. Do not attempt to disassemble the unit except to replace the batteries.
1. QUICK START
1. Press and release the POWER button.
2. Unit will beep twice when ready.
3. Verify temple or underarm mode: Push the SET button if you wish to change.
4. Hold firmly to temple or underarm, wait for long beep and read results.
2. Measuring guidelines:
1. Measurement body location is the temple, in proximity to the temporal artery,
between the end of the eyebrow and the hairline.

. Do not place the thermometer on scarred tissue compromised by skin disorder, open
– Medicine Timer
TM
F or
o
non-invasive
sensor
Set
button
C
o
Power
button
Timer
button