Important - Temple Touch PREMIUM Instrucciones De Uso

6. Setting the operating scale °F or °C
The device setting is by default Fahrenheit (°F).
To change the scale to °C, or back to °F:
1. While OFF, press and hold the SET button.
. Continue pressing SET, then press the POWER button.
3. Continue pressing both buttons until the scale changes and then
release.
4. Wait for  beeps and measure temperature (see section 3)
7. Installing and replacing the Batteries:
The thermometer uses  standard AAA 1.5v batteries. To install/replace, first switch
off the device:
1. Using a screwdriver, loosen the screw on the battery cover and lift it off the
thermometer.
. Remove the drained batteries and place new batteries in the battery compartment,
matching polarity according to the diagram.
3. Secure the battery cover using the screw.
IMPORTANT: It is recommended to remove the batteries from the
thermometer when it is not used for a long period.
WARNING:
Do not dispose of batteries in fire, recharge, put in backwards,
disassemble, mix with used or other battery types – they may explode or leak and
cause injury. Waste batteries should be deposit in a batteries recycling trash only.
8. About body temperature measurement:
How does the thermometer work?
The accurate measurement is obtained
by using a unique probe, which
measures the heat flow from the blood
vessels to the skin and converts it
to body temperature.
Information about Body Temperature
What is "normal" body temperature?
"Normal" body temperature varies from person to person, changes according to time
6
Blood
Energy Flow
vessels Skin