Important Safety Information - Swann SWIFI-SLMFLCW Guia De Inicio Rapido

• INSTALL THE PRODUCT IN ACCORDANCE WITH LOCAL AND NATIONAL ELECTRICAL CODES.
IF YOU HAVE ANY DOUBTS OR QUESTIONS ABOUT THE ELECTRICAL CONNECTIONS OR IF
YOU NEED AN ELECTRICAL JUNCTION BOX INSTALLED, CONSULT A LICENSED ELECTRICIAN.
IN CERTAIN JURISDICTIONS, THIS PRODUCT NEEDS TO BE INSTALLED BY A LICENSED
ELECTRICIAN. CHECK WITH LOCAL AUTHORITIES FOR APPLICABLE REQUIREMENTS.
• THE PRODUCT MUST BE MOUNTED ON A FLAT VERTICAL SURFACE CAPABLE OF SUPPORTING
THE FULL WEIGHT OF THE PRODUCT.
• ENSURE THE VOLTAGE MARKED ON THE PRODUCT IS THE SAME AS THE ELECTRICAL POWER
SUPPLY TO BE USED.
• DO NOT CONNECT TO A DIMMER SWITCH OR TIMER.
• ALWAYS TURN OFF ELECTRICAL POWER AT THE MAIN CIRCUIT BREAKER OR FUSE BOX BEFORE
WIRING FIXTURE TO THE POWER SUPPLY. FAILING TO DO SO COULD RESULT IN SERIOUS
INJURY, ELECTRICAL SHOCK, AND/OR RISK OF FIRE.
• DO NOT RELY ON THE WALL SWITCH ALONE TO TURN OFF THE POWER.
• DO NOT OPEN OR DISASSEMBLE THE PRODUCT. THERE ARE NO USER-SERVICEABLE PARTS
INSIDE.
EN
2

IMPORTANT SAFETY INFORMATION