Monster SmartView 100S Guía Del Usuario Y Garantía página 18

Hanging Your LCD TV on the Wall Plate
1)
Connect the TV's power cord and any AV cable
to the TV before hanging it. With the help of a friend,
lift the TV and plug the TV's power cord into a nearby
AC outlet. If routing AV cable in wall, run it through the
prepared opening in your wall.
2)
Lift your TV up to mount level. Raise the TV just above
the wall mounting plate. Slide the TV and mounting
plate downward onto the wall mounting plate.
3)
Firmly secure the TV mounting plate on the wall plate
by threading the provided security screw through
one of the security tabs on either side of the mount.
Tighten the screw with a Phillips screwdriver.
Do not over tighten.
Congratulations
You've successfully installed your SmartView 100S
FlatScreen Mount.
Visit us at www.MonsterCable.com/FlatScreen for more
innovative Monster FlatScreen products, including our
ultra low-profi le FlatScreen Cable and our safe FlatScreen
Clean LCD and plasma cleaning solution for preserving
your fl atscreen display.
14
All manuals and user guides at all-guides.com