Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Dimmer clock
1. ALARM
2. SLEEP
3. ALARM SWITCH
4. TIME
5. CONTROL WHEEL
6. HOUR
7. MINUTE
After turning on, the device will do an automatic self - check, and then displays the numbers 0 - 9.
A beep will sound when everything has been set up correctly.
This clock is able to adjust the brightness of your bulb lamp.
Operation：
SLEEP time setting
Press the SLEEP button and hold to set the sleeping time to a maximum time of 1 hour 59 minutes.
Adjust the time by pressing the HOUR and MINUTE buttons. Roll the CONTROL WHEEL to adjust the
light level. The lamp will automatically turn off when the preset time is reached.
ALARM setting
Press the ALARM button and hold to set the alarm time by pressing the HOUR and MINUTE buttons.
Roll the CONTROL WHEEL to adjust the lamp light level. When the level is set to 0, the lamp will not
light when the alarm goes off.
When lamp level is not set to 0, the lamp will gradually light for 30 minutes prior to the alarm time. The
device will beep when the preset alarm time is reached. Press the CONTROL WHEEL to turn off the
2
Publicidad
