Safety Guidelines - Definitions; Important Safety Instructions; Características; General Safety Warnings And Instructions - Stanley SL2M09 Manual De Instruccion

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

FEATURES
CARACTERÍSTICAS
3
2
1
FEATURES
1. On/Off trigger
2. DC charging port
3. Quartz halogen bulb
4. Charge status LED indicator
5. 120 volt AC charger (back of unit)
6. Trigger lock
7. 12 volt DC charger (optional accessory)
8. Carry lanyard (not shown) (optional accessory)
SL2M09_ManualENSP_080315.indd 2-3
6
7
CARACTERÍSTICAS
1. Disparador de encendido/apagado
2. Puerto de recarga de CC
3. Bombillo de halógeno de cuarzo
4. Indicador del LED del estado de la carga de la batería
5. Cargador de la CA de 120 voltios (posterior de la unidad)
6. Cerradura del disparador
7. Cargador de la CC de 12 voltios (accesorio opcional)
8. Cordón para llevar el reflector (no demostrado) (accesorio
opcional)
2
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
4
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user' s authority to operate the equipment.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not avoided, may result in
property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always be followed to reduce the
risk of personal injury. Improper operation, maintenance or modification of tools or equipment could result in serious injury and
property damage. There are certain applications for which tools and equipment are designed. Manufacturer strongly recommends
5
that this product NOT be modified and/or used for any application other than for which it was designed. Read and understand all
warnings and operating instructions before using any tool or equipment.

IMPORTANT SAFETY INSTRUCTIONS

WARNING: Read all instructions before operating spotlight. Failure to follow all instructions listed below may result
in electric shock, fire and/or serious injury.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS

WARNING: This product or its power cord contains lead, a chemical known to the State of California to cause cancer and birth
defect or other reproductive harm. Wash hands after handling.
• LIGHTED LAMP IS HOT.
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, EXPOSURE TO EXCESSIVE UV RADIATION, OR INJURY
TO PERSONS:
• Turn off/unplug and allow to cool before replacing the Halogen bulb.
• Halogen bulb gets HOT quickly!
• Do not touch the bulb at any time when operating.
• Only contact switch/plug when turning on.
• Do not touch hot lens or enclosure.
• Do not remain in light if skin feels warm.
• Use only with a 6 volt/75 watt or smaller halogen bulb.
• When changing bulb, use a soft cloth. Oil from skin may damage bulb.
• Do not operate the spotlight with a missing or damaged lens or enclosure.
WARNING – WHEN USING ELECTRICAL APPLIANCES, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED, INCLUDING
THE FOLLOWING:
• To reduce the risk of injury, close supervision is necessary when the spotlight is used near children.
• Use only attachments recommended or sold by the manufacturer.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK:
• Do not put the spotlight in water or other liquid. Do not place or store the spotlight where it can fall or be pulled into water or
become wet.
• Do not clean this appliance with a water spray or the like.
• Use only the charger supplied by the manufacturer to recharge.
READ ALL INSTRUCTIONS
3
8/3/2015 1:54:12 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido