DAYRON RETRO 500W Manual De Instrucciones página 17

1) Measuring Cup + Inner cover
2) Lid
3) Glass Jug
4) Sealing ring
5) Cutting blade
6) Retaining ring
7) Motor & base
8) Speed selector
Note: the cutting unit N° 4 + 5 + 6
Is not removable from the bowl.
Before first use, remove the unit and all accessories carefully and paying attention
to the sharp accessories.
Clean with soap and water, bowls and all accessories. Rinse and dry thoroughly.
Clean the outside and inside of the machine cabinet with a damp cloth and wipe
dry.
• Unroll the power cord completely.
• Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
• Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
• Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
• Never modify the appliance in anyway.
The wash is going to mix food (fruits, vegetables etc.) If need to please peel skin
or eliminate the nucleolus, Then cut into slices with 20-25mm tubby foods.
Put small pieces of food into the blend cup, Add some water properly, and then
close the big cover and tight the cup by turning the cover clockwise.
Put the blend cup on its pedestal correctly according to the mark.
Power the line plug in the power source.
Adjust the switch to speed 1 (low speed) or speed 2 (high speed) position, the
blender begins working.
AW_26111_Userguide_VO1_2020
DESCRIPTION
FIRST USE
USE
17