Product Description; Technical Data - YATO YT-85170 Manual Del Usuario

PRODUCT DESCRIPTION

The Garden Blower is designed for the removal of small debris during garden works. The Blower is not intended to remove debris
from large areas. The appliance function also includes using it as an industrial vacuum for collecting fi ne, dry and cold debris from
small areas. As the proper use of the product is a condition for its correct, reliable and safe operation, please
read and keep the entire instruction manual before the fi rst use of the tool.
The supplier shall not be held liable for any damage resulting from failure to observe the safety regulations and recommendations
specifi ed in this manual.
EQUIPMENT
The product is delivered complete, but some assembly work described in further sections of the Manual is required prior to its use.
The product is supplied with a nozzle and vacuum collection bag.

TECHNICAL DATA

Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Rated speed
Blow capacity
Nozzle Outlet Diameter
Protection class
Ingress Protection Rating
Noise
- accustic pressure L ± K
pA
- accustic power L ± K
wA
Vibration level a ± K
h
Weight
GENERAL WARNINGS FOR THE SAFETY OF MACHINES
Warning! Read all safety warnings, illustrations and specifi cations provided with this machine. Failure to do so may result
in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "machine" used in warnings applies to all machines driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with machines in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power machines generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
Electrical safety
The plug of the electric cable must match the power socket. You must not modify the plug in any way. Do not use any
plug adapters with earthed machines. An unmodifi ed plug that fi ts the outlet reduces the risk of electric shock.
Avoid contact with earthed surfaces such as pipes, radiators and coolers. Grounding the body increases the risk of electric shock.
Do not expose machines to contact with atmospheric precipitation or moisture. Water and moisture that gets inside the
machine increases the risk of electric shock.
Do not overload the power cable. Do not use the power cord to carry, pull or unplug the power plug from the power outlet.
Avoid contact of the power cable with heat, oils, sharp edges and moving parts. Damage or entanglement of the power cord
increases the risk of electric shock.
In the case of working outside closed rooms, use extension cords intended for work outside closed rooms. The use of an
extension cord adapted for outdoor use reduces the risk of electric shock.
O R I G I N A L
All manuals and user guides at all-guides.com
GB
Unit
[V~]
[Hz]
[W]
[min ]
-1
[m /min]
3
[mm]
[dB(A)]
[dB(A)]
[m/s 2 ]
[kg]
I N S T R U C T I O N S
Value
YT-85170
220 - 240
50 / 60
600
6000 - 16000
4
25
II
IPX0
82,1 ± 2,5
95,0 ± 2,5
2,994 ± 1,5
1,2
11