Packing List - Ego Power+ ST1210E Manual Del Usuario

Recortadora de hilo inalambrica de 56 voltioa
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 38
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in operating
condition. Be aware of possible hazards even when
the tool is not operating. Take care when performing
maintenance or service.
Do not wash with a hose; avoid getting water in motor
and electrical connections.
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
Always wear substantial footwear and long trousers
while operating the machine.
Always be sure of the footing on slopes and to walk,
never run.
SAVE THESE INSTRUCTIONS!
SPECIFICATIONS
Voltage
No-load speed
Cutting Mechanism
Cutting Line Type
Cutting Width
Weight
(without battery pack)
Measured sound power level L
Sound pressure level at
operator's ear L
PA
Guaranteed sound power level L
(according to 2000/14/EC)
Rear Handle
Vibration a
h
Front Handle
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
The vibration emission during actual use of the
power tool can differ from the declared value in which the
tool is used;In order to protect the operator, user should wear
gloves and ear protectors in the actual conditions of use.
All manuals and user guides at all-guides.com
56 V
7000 /min
Bump Head
AL0800 Ø2.0 mm
nylon round line
30 cm
2.85 kg
90.76 dB(A)
K=2.5 dB(A)
WA
75.0 dB(A)
K=2.5 dB(A)
WA
91 dB(A)
3.279 m/s
2
K=1.5 m/s
2
4.915 m/s
2
K=1.5 m/s
2
56 VOLT LITHIUM-ION CORDLESS LINE TRIMMER — ST1210E

PACKING LIST

PART NAME
Line Trimmer
Guard
Front-assist handle assembly
Hex wrench
Operator's manual
DESCRIPTION
KNOW YOUR LINE TRIMMER (Fig. A)
1. Trigger
2. Rear Handle
3. Lock-Off Lever
4. Soft Sleeve
5. Adjustable Front-assist Handle
6. Shaft
7. Bump Protector
8. Bump Knob
9. Bump Head (Cutting Head)
10. Guard
11. Line-cutting Blade
12. Ejection Mechanism
13. Electric Contacts
14. Latch
15. Battery-release Button
ASSEMBLY
WARNING:
If any parts are damaged or missing,
do not operate this product until the parts are replaced.
Use of this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not attempt to modify this product
or create accessories not recommended for use with this
line trimmer. Any such alteration or modification
is misuse and could result in a hazardous condition
leading to possible serious
EN
QUANTITY
1
1
1
1
1
9

Publicidad

Tabla de contenido
loading

Tabla de contenido