Kohler REVIVAL K-2008 Instrucciones De Montaje página 5

Set the pedestal mounting hole over the floor-mounted hanger bolt.
The purpose of this hanger bolt is to prevent the pedestal from
moving sideways – the pedestal does not need to be secured with
a nut.
Set the lavatory back into the mounting position and level.
Install cap nuts and washers and secure the lavatory to the wall.
Carefully turn nuts until contact is made with the vitreous china.
CAUTION: Risk of personal injury or product
damage. Do not overtighten as breakage may result.
Connect and tighten trap.
Connect hot and cold supplies to faucet.
CALL US FOR HELP
Here's what you need to do if you require service:
First review the installation instructions to ensure correct installation. For additional assistance in the USA, call our Customer Service
Department for direct help. You may also contact us at our web site listed below.
A
1007270-2-
Call 1-800-4-KOHLER within the U.S.
Call 001-877-680-1310 within Mexico
Call 1-800-964-5590 within Canada
www.kohlerco.com
5
WASHER
LAVATORY
CAP NUT
Fig. #7
Kohler Co., Kohler, WI U.S.A.