Maintenance - ArmorAll VO406S 0901 Manual Del Usuario

1. Verify that the power cord is disconnected from the outlet. (fig. 1)
2. Disconnect the hose from the vacuum. (fig. 2)
3. Undo the latches and remove the power head from the container. (fig. 3)
4. Clear all dirt or debris from the container and hose. (fig. 4)
5. Clean or replace the filters. (fig. 5)
6. Check the hose, attachments, and power cord to verify that they have not been damaged.
IMPORTANT!
Clean or change the dust filter regularly for best performance. ALWAYS USE DUST FILTER
FOR DRY VACUUMING. If the machine is used with out the dust filter, the motor will burn out and the
warranty will be voided. Always keep spare filters on-hand.
NOTICE!
The filter included is made of high quality material designed to stop small dust particles. The filter
should be used for dry pick-up only. A dry filter is necessary to pick up dust. If the dust filter is wet, it will clog
quickly and be very difficult to clean. Handle the filter carefully when removing it for cleaning or replacement.
Check the filter for tears or small holes. A small hole can let dust pass through and out of the cleaner. Do not
use a filter with holes or tears - replace it immediately.
WARNING:
ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE REMOVING
THE POWER HEAD FROM CONTAINER.
All manuals and user guides at all-guides.com

MAINTENANCE

11