Sony IPELA SNC-DF40N Manual De Instalación página 51

6
Click on the SNC-DF40N or
DF40P you want to assign a new
IP address in the list.
The network settings for the selected
SNC-DF40N or DF40P are displayed.
7
Set the IP address.
To obtain the IP address
automatically from a DHCP
server:
Select Obtain an IP address
automatically.
The IP address, Subnet mask and
Default gateway are assigned
automatically.
To specify the IP address
manually:
Select Use the following IP address,
and type the IP address, Subnet mask
and Default gateway in each box.
8
Set the primary DNS Server
address and, if necessary,
secondary DNS server address.
To obtain the DNS server
addresses automatically:
Select Obtain DNS server address
automatically.
To specify the DNS server
addresses manually:
Select Use the following DNS server
address, and type the Primary DNS
server address and Secondary DNS
address in each box.
Note
The Third DNS server address and
Fourth DNS server address are invalid
for this unit.
9
Set the HTTP port number.
Normally select 80 for the HTTP port
No. To use another port number, select
the text box and type a port number
between 1024 and 65535.
Assigning the IP Address to this Unit
21
GB