General Setting - AKASO Pro V50 Manual Del Usuario

General Setting

1. Control: Mic / Speaker / Brightness
You can adjust the mic, speaker and brightness of your V50 Pro.
2. Sounds: Shutter: ON / OFF
Boot-up: ON/ OFF
Beep: ON/ OFF
Default setting is on.
You can turn on or off the shutter, boot-up, beep sounds.
3. Distortion Calibration: ON/ OFF
Default setting is off.
Turn on Distortion Calibration, it can correct the image distortion.
4. Angle: Super Wide / Wide / Medium / Narrow
Default setting is Super Wide.
The angle refers to how much of the scene (measured in degrees) can be captured
through the camera lens. Super Wide angle captures the largest amount of the scene,
while Narrow angle captures the least.
5. Power Frequency: 50Hz / 60Hz
Default setting is 50Hz.
6. Diving Mode: ON / OFF
Default setting is off.
Turn on Diving Mode, it can compensate for the lack of red light in underwater scenes.
Diving Mode is designed to be used in tropical and blue water, optimized for use between
10 and 80 feet.
7. WIFI: ON / OFF
Default setting is off.
8. RF: ON / OFF (Remote)
Default setting is off.
11
All manuals and user guides at all-guides.com 9. Date & Time: MM / DD / YY HH / MM / AM or PM
Default setting is MM / DD / YY HH / MM / AM or PM.
10. Screen Saver: OFF / 1Min / 3Min / 5Min
Default setting is 1Min.
Turns off the LCD display after a period of inactivity to save battery life. To turn on the LCD
display again, press any button on the camera.
11. Auto Power Off: OFF / 1Min / 3Min / 5Min
Default setting is 3Min.
Powers off your V50 Pro after a period of inactivity to save battery life.
12. Quick Record: ON / OFF
Default setting is off.
If you turn on Quick Record, the camera records video automatically after you turn on
V50 Pro.
If you turn on Quick Record and use it as a dash cam, the camera will turn on automatically
if you start your car and will turn off if you stop your car.
13. USB: Storage / PC Camera
If you connect this camera to computer, please select 'Storage'.
If you want to use this camera as a PC camera, please select 'PC Camera'.
14. Reset WiFi Setting: Yes / No
Default setting is No.
This option can erase the WiFi data of V50 Pro.
15. Language: English / German / French / Italian / Spanish / Japanese /
Simplified Chinese/ Traditional Chinese
Default setting is English.
16. Format Card: Yes / No
To keep your micro SD card in good condition, reformat it on a regular basis. Reformatting
erases all of your content, so be sure to offload your photos and videos first.
12