All manuals and user guides at all-guides.com
Take care of your tools. Keep the tools sharpened and clean to allow
you to work properly and safely. Follow up the maintenance regulations
and the instructions on changing tools.
SAFE USE OF THE ELECTRIC CHAINSAW
Always wear goggles, ear protection, protective gloves and clothes for
heavy work!
Front handle
Only use the chainsaw with an
accredited extension cable designed
Back handle
for outdoor use. The chainsaw is
equipped with an emergency switch.
The chainsaw must be used holding
the front handle with one hand and
turn the back handle with the other
hand. Turn the switch on.
If the chainsaw does not work, the chain brake must be released. Make
sure to read the points "chain brake" and "releasing the chain brake".
After the connection, the chainsaw will immediately work at high speed.
To connect: Push the safety button, and
Safety button
without loosen it press the On/Off switch.
On/Off switch
To disconnect: Release the ON/OFF switch in the back handle.
By releasing the ON/OFF switch the chainsaw will stop in 1 second,
producing great sparks in the engine. This is normal and safe for the
suitable operation of the chainsaw.
After working with the chainsaw, you must always: clean the chain
and the guide bar and replace the bar cover.
Chainsaw protection
Never use the chainsaw under the rain or under humid conditions.
If the cable extension is damaged, unplug the chainsaw immediately.
Do not work with a damaged cable.
Check that the chainsaw is not damaged. Before using the machine
again, check the safety devices and make sure they all work. All the
parts must be correctly assembled and they must fulfill all the required
32