Start-Up Checklist - SCHOTT EyeMag Light II Manual Del Usuario

• When the unit is in "Light off" condition, the control
unit will switch off automatically after approximately
2 seconds. You will be able to tell that the unit
has switched off when the function indicator is off.
• You can switch the control unit (2) off in any operating
state by pressing and holding the ON/OFF button (for
approx. 2 seconds).
Check the following points prior to each use
(without a patient):
• The LED headlamp is connected to the control unit.
• When the LED illumination device is switched on, the
function indicator is lit permanently.
• The remaining battery power indicated by the function
indicator is sufficient for the intended application.
• The switching functions on the LED illumination device
are in order.
All manuals and user guides at all-guides.com
6.

Start-up checklist

51
GB