König Electronic IR-URC31 + Manual De Uso página 4

TV, DVD, etc.). The Volume and Mute buttons on the remote control still control
the volume and mute of your amplifier.
1. Press the device button for which you wish to lock the volume.
2. Press SET and number button 5, the current VOL and mute will be locked,
LED flashes twice as confirmation..
Note: Press the Set button and number button 6 to unlock volume.
F. Write-protection of Device Codes
Proceed as follows to prevent device codes from being accidentally overwritten
or deleted.
1. Press the device button which you wish to protect
2. Press and hold down the SET button, simultaneously press number button 7
and then release both buttons. The LED flashes twice and the code is now
protected and cannot be overwritten/deleted.
Note: To cancel write protection, press and hold down the SET button,
simultaneously press number button 8 and then release two buttons. The LED
flashes twice and the protection is cancelled.
H. Reset / Delete Function
To delete the codes which you have set in the remote control, press and hold
down the SET button, then press the 0 button simultaneously for more than 3
seconds and then release both pressed buttons. The LED flashes twice and all
the set up data and commands in the remote control are deleted.
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and modifications of
the product or damage caused due to incorrect use of this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered trademarks of
their respective holders and are hereby recognized as such.
Keep this manual and packaging for future reference.
Attention:
This product is marked with this symbol. It means that used electrical
and electronic products should not be mixed with general household
waste. There is a separate collections system for these products.
Bedienung:
Die 4-in-1 Universal-Fernbedienung ist für alle Fernseher (TV), DVD-Player
(DVD), digitale und analoge Satellitenempfänger und Kabelempfänger (CBL/
SAT) der meisten Hersteller geeignet. Die Universal-Fernbedienung kann
nahezu alle allgemeinen Gerätefunktionen ausführen.
Tastenbelegung
SET – Fernbedienung einstellen.
TV , SAT , DVD, DVB – Gerätetasten
Power – Ein/Aus
0-9 – Zifferntasten zur Kanalwahl oder Eingabe des Gerätecodes während der
Einstellung.
DEUTSCH
4