Wiseup S818 Guia Del Usuario página 4

All manuals and user guides at all-guides.com
7).SET THE DATE/TIME STAMP
OPTION 1:
(1)Slide the Power On/Off Switch to the OFF position.
(OR slide the Power On/Off Switch to the ON position. Make sure the indicator
light is ON)
(2)Connect the camera to a proper PC computer USB port with the USB cable
provided.
(3) Removable disk drive folder appears
(4) Click on the drive in the root directory and inside the root directory, create a
time.txt file.
(5) Write the desired date and time in the txt file with the correct format:
YYYYMMDDHHMMSS Y(For example: 20160221121758 Y). If you do not
want the time/date stamp to appear on the video, please change the last
letter from Y to N. Save this file.
(6) Restart the camera and the system will upgrade the program automatically.
OPTION 2:
(1) Remove the Micro SD card from the camera and insert it into a card reader.
(2) Insert the card reader into a proper PC computer.
(3) Removable disk drive folder appears
(4) Click on the drive in the root directory and inside the root directory, create a
time.txt file.
(5)Write the desired date and time in the txt file with the correct format:
YYYYMMDDHHMMSS Y (For example: 20160221121758 Y). If you do not
want the time/date stamp to appear on the video, please change the last
letter from Y to N. Save this file.
(6) Restart the camera and the system will upgrade the program automatically.
8). CHARGING
(1) Slide the Power On/Off Switch to the Off position
(2) Connect the camera to a PC computer or a DC5V charger adapter
(recommended) with the USB cable provided.
(3)The red indicator light will keep flashing during the charging process.
(4)Camera is fully charged when the red light is solid on.
(5)It will take up to 2hours to obtain a full charge.
(6) The camera can record videos for 1.5 hour continuously with a fully
charged battery.