Volume Settings - Hansgrohe RainBrain 15841 Serie Modo De Empleo

Heating / warm-up
The warm-up function is available on the start screen (ill. 1). You can
use it to heat the water to the desired temperature before showering. All
confi gured showers are activated.
• Set the desired temperature before activating the showers.
• A prompt window appears after pressing the warm-up button (ill. 2).
• Confi rm the function by pressing OK.
• A countdown of 5 seconds starts. Within these 5 seconds you can leave
the shower or cancel the warm-up.
• A wave animation runs until the desired temperature is reached.
• The display reads: Warm-up complete.
The warm-up can last for up to max. 90 seconds. The warm-up is cancelled
if the desired temperature is not reached within this period of time. The
display reads: Warm-up cancelled.
1
°C
Warm up
38,
34,
Volume
13:56
2
Warm-up
Caution!
All showers are briefl y started
for warm-up. Please
leave the shower. Warm-up
starts in
5 seconds.
Back
48
Operating instructions
°C
5
0
Menu
OK
English:
Volume setting
The volume function is available on the start screen (ill. 1).
After pressing the button "Volume" you can adjust the water volume with 10
levels available (ill. 3).
1 = lowest water volume, 10 = highest water volume.
You can adjust the levels using the control dial or + and - on the display.
Note: This function is available only with item 15842000; 15842400.
3
Level
Water volume
OK
3
Menu