Adidas C-21x Manual Del Usuario página 11

CONSOLE
1
2
3
4
5
1. TIME DISPLAY 5. ENTER
Select or switch values
2. CALORIE DISPLAY
of each function
3. DISTANCE DISPLAY
6. SPEED/RPM DISPLAY
4. DOWN (-)
7. PULSE DISPLAY
Adjust function value down
21 C-21X
BIKE
COMPUTER PROGRAMS
BASIC FUNCTION
When users start exercising, the console will power on with
a long beep sound,and then enter the main menu. Users can
start exercising directly or start exercising after function values
are set.
Start exercising directly and the values of TIME/DISTANCE/
CALORIES will count up from 0.
To set the function values, press and hold RESET to restart
the console and enter the main menu.
Press ENTER to select and highlight function, the
corresponding function value will flash. Press (+)/(-) to adjust
values, or press RESET to revert to 0. Press ENTER again to
confirm setting and highlight the next function value. Continue
like this to set values for TIME/ DISTANCE/CALORIES/
6
HEART RATE.
After all settings are completed, users can start exercising.
All set function values (except heart rate) will start to count
7
down. When function values (except heart rate) reach 0, the
buzzer alarms, the values flash and begin to count up from
0. If the set heart rate value is reached during exercise, the
8
console will flash to highlight this.
9
MPH (ML) TO KPH (KM) CONVERSION
In the main menu, press and hold the (+) and (-) keys at the
same time to enter the conversion interface. Select the metric
(KM) or imperial (ML) system by pressing (+) or (-), then press
ENTER to save and exit.
AUTOMATIC POWER ON AND SHUT DOWN
When the user starts to exercise, the console will power on;
If the equipment is inactive for approximately 2 minutes, it will
8. UP (+)
automatically shut down.
Adjust function value up
9. RESET
NOTE: Keep moisture away from console.
Press to reset all values,
and hold to restart
UK
WWW.ADIDASHARDWARE.COM 22