probst SPEEDY VS-140/200 Instrucciones De Uso página 71

The operator is responsible for attaching the suction plate based on the load characteristics (surface, air-tightness,
weight).
The maximum permitted lift capacity of the suction plate determines the maximum permitted lifting capacity
of the entire lifting device (see the lift capacity plate on the suction plate).
The operator is required to document the static strength and holding force depending on the potential vacuum and to
adhere to safety factors. The standard DIN EN 13155 in its current valid version should be used as the basis during mount-
ing.
Probst GmbH accepts no liability for damages resulting from use of an unsuitable suction plate.
WARNING
Unexpected switching on when attaching the suction plate
Danger of injury due to vacuum.
Ensure that the vacuum generator cannot be switched on while the suction plates are being mounted.
1. Place the lifting device on the suction plate (6).
2. Lock both levers (6.1).
52700015 / 52700016 / 52700017 / 52700018 / 52700019 / 52700020
Operation
23 / 41