Operation; Install The Hpm110; Switch On The Hpm110 - WEBTEC HPM 110 Instrucciones De Manejo

4. Operation

4.1 Install the
NOTIFICATION
Material damage due to excessive force.
► Only ever hand-tighten the HPM110 (together with the pre-in-
stalled adapter)!
► If you operate the HPM110 SR-HPM-110-MT without an
adapter, maintain the permitted tightening torque of 35 Nm.
1
Mount the HPM110 in the desired position using the pre-in-
stalled adapter.
4.2 Switch on the
The HPM110 is supplied from the factory with built-in batteries.
1
Press the ON/OFF key.
Ä The HPM110 starts and carries out a self-test.
Ä The current settings are displayed one after the other.
HPM110
HPM110
Operation
15