Functional Description; Hardware Included - Milwaukee 48-22-8590 Manual Del Operador

SYMBOLOGY
Warning
Read Operator's Manual
Electrical Shock Hazard
Do not open more than one drawer at a
time. Station may tip, causing injury.
Lock wheels when station is not
being moved. Unlocked wheels can
allow the station to move
unexpectedly.
Do not use drawers as steps. Station
may tip, causing injury.
FPO
Lock all drawers before moving the station.
Unplug power strip before moving the
station.

FUNCTIONAL DESCRIPTION

2
4
3
5
6
7
8
9
10
11
1. Top tray frame
2. Tooling cup
3. Fold-out work tray
4. Side handle
5. Grommet
6. Power strip
7. Cord storage
brackets
MILWAUKEE LOGO TO BE PRINTED WHITE,
ALL OTHER "WHITE" TEXT AND GRAPHICS TO
BE BASE STOCK MATERIAL
CAT. NO. 48-22-8560
MILWAUKEE LOGO TO BE PRINTED WHITE,
ALL OTHER "WHITE" TEXT AND GRAPHICS TO
BE BASE STOCK MATERIAL
1
CAT. NO. 48-22-8560
MILWAUKEE LOGO TO BE PRINTED WHITE,
ALL OTHER "WHITE" TEXT AND GRAPHICS TO
BE BASE STOCK MATERIAL
CAT. NO. 48-22-8560
14
12
13
8. Post
9. Bumper
10. Storage tray
11. Swivel caster with
brake
12. Bottom tray frame
13. Rigid caster
14. Storage bar
GROUNDING
Improperly connecting the ground-
WARNING
ing wire can result in the risk of
electric shock. Check with a qualified electrician
if you are in doubt as to whether the outlet is
properly grounded. Do not modify the plug pro-
vided with the station. Never remove the ground-
ing prong from the plug. Do not use the station
if the cord or plug is damaged. If damaged, have
it repaired before use. If the plug will not fit the
outlet, have a proper outlet installed by a qualified
electrician.
Stations with Three Prong Plugs
Stations marked "Grounding Required" have a
power strip with a three wire cord and three prong
grounding plug. The plug must be connected to a
properly grounded outlet (See Figure A). If the
power strip should electrically malfunction or break
down, grounding provides a low resistance path to
carry electricity away from the user,
reducing the risk of electric shock.
The grounding prong in the plug is
connected through the green wire
inside the cord to the grounding sys-
tem in the power strip. The green wire in the cord
must be the only wire connected to the power strip's
grounding system and must never be attached to an
SER. H25A BATCH:
electrically "live" terminal.
40 MECHANIC'S CART
"
Your power strip must be plugged into an appropriate
outlet, properly installed and grounded in accordance Milwaukee Tool, Brook eld, WI 53005
with all codes and ordinances. The plug and outlet
should look like those in Figure A.
SER. H25A BATCH: ASSEMBLY
40 MECHANIC'S CART
"
Be sure to follow the assembly in-
CAUTION
Milwaukee Tool, Brookfield, WI 53005 structions for the appropriate sta-
A
SER. H25A tion. Do not use power tools to assemble station. BATCH:
Tighten bolts with hand wrenches.
40 MECHANIC'S CART
"
Tools Required
Milwaukee Tool, Brookfield, WI 53005
Phillips Safety
screwdriver goggles

Hardware Included

NOTE: Items not shown to actual size. Hardware
lengths are approximate.
Hardware Item
AA
BB
CC
DD
EE
3
Fig. A
A
Made in Vietnam
A
Made in Vietnam
Made in Vietnam
10 mm
Wrench
Description
Screw M6 x 16L
Screw M8 x 18L
Washer
M19 x 8.5 x 2
Screw M4 x 12L
Screw M6 x 25L
13 mm
Wrench
Quantity
40
16
16
8
2