Description Of Parts - Overmax X-bee drone 9.5 fold Manual De Usuario

Model configuration
Components in the set

Description of parts

Drone (fig. A, B)
1.
Brushless motor
2.
Leg
3.
Propeller
4.
Camera
Controller (fig. C, D, E)
1.
Photo/video
2.
Left stick
3.
Lock/unlock key
4.
Mobile device holder
5.
Return „home" key
6.
Right stick
Display icons (fig. F)
1.
Return „home"
2.
Headless mode indicator
3.
Drone battery status
4.
Distance from „home"
5.
Height
6.
GPS
How to prepare the device
1.
Spread drone legs (fig. 1). At first spread upper legs.
2.
Insert the storage battery into the drone (fig.). NOTE! Make sure you properly insert the
storage battery. If you are wrong, you may affect safety of the flight. The device may
also crash due to power cut.
3.
Insert two AA batteries into the controller, pay special attention to battery polarization
(fig. 3). Close the cover.
The drone with a storage battery and
propellers installed in the way presented
in the operating manual.
The drone, controller, four propellers,
storage battery, USB cable, screwdriver,
operating manual.
5.
Optimeter
6.
Rear LED
7.
On/off switch
7.
On/off switch
8.
Display
9.
Take-off/land key
10.
Camera angle adjustment knob
11.
Speed switch (high / low)
12.
GPS key
7.
Number of satellites
8.
Drone working mode
9.
Speed mode
10.
Photo/video
11.
Controller battery status
12.
Signal strength indicator
EN