Control Mode; Smartphone Application - Overmax X-bee drone 9.5 fold Manual De Usuario

Control mode

Mode 1 (A, fig. 22):
1.
Throttling valve
2.
Fly forward or backward
3.
Turn left or right
4.
Fly left or right
Mode 2 (B, fig. 22):
1.
Fly forward or backward
2.
Throttling valve
3.
Turn left or right
4.
Fly left or right
To change the mode:
1.
Press the lock key ( ), and simultaneously activate the controller by sliding the on/
off switch (A, fig. 23).
2.
Press and hold the return key ( ) for about 3 seconds to change the mode 1 into 2.
The selected mode is displayed on the LCD screen.
3.
By default the product works in the mode 2.
4. NOTE! Before you change the mode, make sure the controller is connected to the drone.
Mobile phone holder
1.
Pull out the phone holder as far as possible (fig. 24).
2.
Tilt the holder forward by 30° (fig. 25).
3.
Draw the protection aside (fig. 26).
4.
Adapt the size of the holder to the mobile phone (fig. 27).

Smartphone application

Apple iOS: find M RC PRO application in Apple Store or scan QR code.
Android: find M RC PRO application in Google Store or scan QR code.
QR codes are listed at the beginning of the operating manual.
How to connect the drone to application
Switch the drone on. In your mobile phone enter Wi-Fi settings. Find and select the network
called „Drone_*******". Run the application in your phone.
If you do not use the memory card in your drone, photographs and videos will be saved
in the application. If you have installed the memory card, photographs and videos will be
saved on the memory card. The files stored on the memory card can be downloaded into
the mobile phone via the application.
The drone connects to Wi-Fi in 5G standard.
EN