Using The Cooler - SEELEY INTERNATIONAL TBA Serie Manual Del Propietário

WALL CONTROL FUNCTIONS

USING THE COOLER

Now that you have read these instructions,
POWER
press the button to turn your air
cooler on. If the air cooler has not operated
for a while , "Pre Cool Cycle" will flash on the
display. The "Pre Cool Cycle will begin and
will take only a few minutes to complete. After
this time, the fan will come on automatically,
and you can enjoy the comfort of cool fresh
air!
6
All manuals and user guides at all-guides.com
AIR TOO COLD
With the cooler running in Automatic mode, you
may find that you are too cold or that the air
cooler is blowing too much air. Press
lower the automatic temperature setting and
reduce the amount of cooling.
If you are too cold with the cooler running in
Manual mode, then press
speed. You can also circulate fresh uncooled air
by pressing
AIR NOT COLD ENOUGH
You may find that with the air cooler running in
Automatic mode, you are not cool enough.
Simply press
If you are not cool enough with the air cooler
running in Manual mode, then press
increase the fan speed. Ensure that cooled air
is circulating by pressing
displays.
You can experiment with the settings on
your wall control. This is the best way to get
the most from your air cooler.
®
TBA Evaporative Cooler
t to reduce the fan
COOL
until "Vent" displays.
s to increase the cooling rate.
COOL
until "Cool"
t to
s to