Auto Recipe ™ Conversion - GE PK916-27" Manual Del Propietário

All manuals and user guides at all-guides.com
Tones at the End of a Timed Cycle
+
At the end of a timed cycle, 3 short beeps
will sound followed by one beep every 6
seconds until the Clear/Off pad is pressed. This
continuous
6-second beep may be canceled.
To cancel the 6-second beep:
Press the Bake and Broil Hi/Lo
pads (on double oven models use the
upper oven controls) at the same time for
3 seconds, until the display shows SF.
Auto Recipe
+
When using convection bake, the Auto Recipe
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
Once the feature is activated, the display
will show the actual converted (reduced)
temperature. For example, if you enter a regular
recipe temperature of 350°F and press the
Start pad, the display will show CON and
the converted temperature of 325°F.
NOTE: This feature does not convert convection
bake cooking times, only regular baking
temperatures.
Conversion
™
(on some models)
Press the Kitchen Timer On/Off
pad. The display shows CON BEEP
(continuous beep). Press the Kitchen Timer
On/Off pad again. The display shows
BEEP. (This cancels the one beep every 6
seconds.)
Press the Start pad.
NOTE: On double oven models, this cancels
the end-of-cycle tone for both ovens.
To activate the feature:
™
Press the Bake and Broil Hi/Lo pads (on
double oven models, use the upper oven
controls) at the same time for 3 seconds,
until the display shows SF.
Press the Convection Bake pad.
The display will show CON OFF.
Press the Convection Bake pad again. The
display will show CON ON.
Press the Start pad.
To deactivate the feature, repeat steps 1–3
above but press the Start pad when CON OFF
is in the display.
GEAppliances.com
21