Charging/Operating A Usb Device (See Fig . C); Use Belt Clip - Parkside PAA 20-Li B2 Manual De Usuario

Charging/operating a USB device (see fig . C)

NOTE
► If only a small current (<130mA) is drawn, the battery adapter
switches off after a short time .
It is therefore not possible to charge or operate such a device .
♦ Connect your USB device to the USB port
adapter .
♦ Press the ON/OFF switch
The control LED
trol LED lights up permanently to indicate the power supply .
Your device can now be charged or operated on the battery
adapter .
♦ To turn off the USB port
for around two seconds .
The control LED
♦ If you are no longer using or charging your device, disconnect it
from the battery adapter

Use belt clip

■ With the belt clip
attach to a belt or the like .
■ 6 │ GB │ IE
to activate the battery adapter
flashes four times and then lights up . The con-
, press the ON/OFF switch
goes out after a short time .
.
you can use the battery adapter
of the battery
again
z . B .
PAA 20-Li B2
.