Cpu Installation; Jumper Settings - Nvidia nForce4 Ultra Manual Del Usuario

Introduction

2-2 Jumper Settings

8
All manuals and user guides at all-guides.com
JCMOS: Clear CMOS data Jumper
If the CMOS data becomes corrupted or you forgot the supervisor or
user password, clear the CMOS data to reconfigure the system back to
the default values stored in the ROM BIOS.
To CMOS Clear data, please follow the steps below.
1. Turn off the system.
2. Change the jumper from "1-2" to "2-3" position for a few
seconds.
3. Replace the jumper back to the "1-2" position.
4. Turn on the system and hold down the <Del> key to enter
BIOS setup.
Settings:
1-2: Normal (Default)
2-3: Clear CMOS