Section 5-- Ghost Bios - Nvidia nForce4 Ultra Manual Del Usuario

Ghost BIOS helps you to recover from a corrupted BIOS situation, which normally would leave your system unable to
boot. Ghost BIOS lets you repair the BIOS yourself saving the hassle of returning the mainboard for repair.
Preparing for Ghost BIOS: Preparing for Ghost BIOS: Preparing for Ghost BIOS: Preparing for Ghost BIOS: Preparing for Ghost BIOS:
1. Install the Thunder Flash utility found in the bundled CD.
2. Create a BIOS Recovery Disk (BRD) with this utility.
Making BIOS Recovery Disk:
1. Run the Thunder Flash utility.
2. Connect to the internet.
3. Insert a blank floppy disk into floppy drive and click "LOAD".
4. Keep this floppy in a safe place for future use.
If If If If If BIOS g BIOS gets cor BIOS g BIOS g ets cor ets corr r r r r upted: ets cor upted: upted: upted:
BIOS g ets cor upted:
When the BIOS is corrupted or fails, restart the system and this screen will appear. You may chose to recover the
BIOS from BRD Floppy created earlier or from bundled driver CD.
1. If recover from BIOS Recovery Disk floppy, insert the floppy disk created earlier and click "1".
2. If recover from mainboard driver CD, insert driver CD into optical drive and click "2".
Note that mainboard driver CD consists only of Safe Mode BIOS. Proper BIOS must be
updated after you enter the O/S.
All manuals and user guides at all-guides.com
Section 5 -- Ghost BIOS
"LOAD"
Introduction
19