Product Information; Configuration - Trust MI-4900Z Manual Del Usuario

USER'S MANUAL

Product information

MOUSE
A: Scroll + tilt + button 3
B: Right button
C: Left button
D: Buttons 4, 5 and 6
E: Battery low indicator
F: Battery compartment
G: On / off button
H: Connect button 2
Batteries
1 Open battery cover. Place batteries. Close cover.
Installation
2 PC off.
3 Connect USB.
4 PC on.
5 Press connect button receiver.
Press connect button mouse.
6
Mouse is ready to use.

Configuration

7 Insert CD-ROM. Click 'Install driver'.
8 Windows Vista: "Allow".
9 Follow on-screen instructions to finish. Restart PC.
10 Double click icon.
Adjust wheel settings and mouse pointer speed if necessary and click "Apply". Click "Restore" to set
11
default values.
Click 'Button'. Program buttons 3, 4, 5 and 6 if necessary and click "OK". Click "Restore" to set default
12
values.
Note
General use
• If Trust driver is not installed, the mouse will have standard Windows 5 button support. Install driver for
extra functions of button 3, 4, 5 and 6.
• Tilt wheel function is dependent on the application.
• Some applications may need MS IntelliMouse default settings for correct function: right click on icon (see 10)
and select "Exit". Start utility again via Windows Start menu.
• The "Zoom" button 6 will only work within applications supporting this function. Use buttons 4 and 5 to zoom
in and out.
RECEIVER
I: Connect button 1
J: Connect status indicator:
Steady: no mouse activity
Flashing: RF connect mode
Flashing quickly: mouse activity
K: USB extension cable
1
UK