Teac RC-L800 Manual Del Usuario página 6

When using TEAC products or
other components
Pressing a device button displays the previously
stored remote control layout.
AMP
A layout to operate the amplifier section of AG-
L800 is stored. Pressing the Page button allows the
selection of BASIC or ADVANCED screens.
(PLAY) and (STOP) buttons operate DV-L800.
TUNER
A layout to operate the tuner section of AG-L800 is
stored. Pressing the Page button allows the
selection of BASIC or ADVANCED screens.
DVD (CD)
A layout to operate the DV-L800 is stored. Pressing
the button switches between the DVD and
DVD/CD. Pressing the Page button allows the
selection of BASIC or ADVANCED screens.
HDR (VCR)
A suitable layout to operate the VCR and Hard Disk
Recorder is stored. Pressing the button switches
between the HDR and VCR. When the HDR is
selected, pressing the Page button allows the
selection of BASIC or ADVANCED screens.
MD (CD-R/TAPE)
A layout to operate the TEAC MD Deck (MD-H
series), CD Recorder (Except RW-D series) and
Cassette Deck (R-H series) is stored. Pressing the
button switches between the MD, CD-R and TAPE.
VOLUME +/– and
TV
A suitable layout to operate the TV is stored.
6
Name of each Control 3
buttons operate AG-L800.
SAT
A suitable layout to operate the Satellite Tuner is
stored.
AUX
A suitable layout to operate the auxiliary
equipment is stored. VOLUME +/– and
operate AG-L800.
Notes:
< The REC key must be pressed for two seconds
to begin recording.
< Device layouts stored in the remote control can
be edited. (See page 15 for more information.)
< In addition to AG-L800/DV-L800, the codes for
the following TEAC devices and 150 TV
manufacturers have been pre-programmed into
this remote control. (See page 8, Pre-
programmed Code Setting, for information on
how to setup the remote control for these
devices.)
DR-L700
CR-L600
C-1D
T-1D
A-1D
Cassette Decks (R-H series)
MD Decks (MD-H series)
CD Recorders (Except RW-D series)
< If you have other devices the remote control
codes can be learned by this remote control.
(See page 11, Learning Feature, for more
information on how to use the Learning
Feature.)
buttons