Operating The Washer - LG WM2240CS Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

H
ow to use washer
Once you have loaded the washer and added
laundry products (detergent, bleach, and/or fabric
softener):
❶ Press the ON/OFF button to turn on the
washer. The lights around the cycle
selector knob will illuminate.
❷ Turn the cycle selector knob to the desired
cycle. The display will show the
preset Wash Temp., Spin Speed,
Soil Level, and Option settings for
that cycle.
❸ If you would like to change the settings for
that cycle, press the appropriate cycle setting
button(s) until the indicator light for the
desired setting is lit.
NOTE: To protect your garments, not every
wash temp., spin speed, soil level, or option is
available with every cycle.
❹ Select any additional cycle options, such as
PRE-WASH, RINSE+SPIN,
QUICK CYCLE, STAIN
CYCLE, or TUB CLEAN by
pressing the OPTION button
until the desired option is lit.
NOTE: To protect your
garments, not every wash/rinse
temperature, spin speed, soil
level, or option is available with
every cycle.
16
All manuals and user guides at all-guides.com

OPERATING THE WASHER

❺ Press the START/PAUSE button to begin the
cycle. The door will latch, the display
will change, and the washer will
calculate the estimated time
remaining. Once the washer has
calculated the estimated total cycle time, the
washer will start. To pause the cycle at any
time, press START/PAUSE.
NOTE: The cycle time displayed may appear
much longer than that of a toploading washer.
The displayed time is for the complete cycle,
rather than just the agitation portion of the
cycle, as is typically shown on a top-loading
washer.
NOTE: If the temperature in the washer is too
high, the door cannot be unlocked until the
washer has cooled. If the water level is too
high, select the DRAIN & SPIN to drain
excess water. Do not try to force the door
open.
Washing time can be reduced significantly for
small or lightly soiled loads by selecting the
Speed Wash cycle and setting the Soil Level
button to Light.
❻ When the load is finished, the signal (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal for
small items.

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido