Operating The Washer - LG WDN12515BD Manual Del Propietário

H ow to use washer
Once you have loaded the washer and added laundry products (detergent, bleach, and/or fabric
softener):
❶ Press the ON/OFF button to turn on the
washer. The lights around the
cycle selector knob will illuminate.
❷ Turn the cycle selector knob to the desired
cycle. The display will show the
preset Wash/Rinse
Temperature, Spin Speed, Soil
Level, and Option settings for
that cycle.
❸ If you would like to change the settings for
that cycle, press the appropriate cycle
setting button(s) until the indicator light for
the desired setting is lit.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil
level, or option is available with every cycle.
❹ Select any additional cycle options, such as
PRE-WASH, STAIN
CYCLE, or EXTRA RINSE,
by pressing the OPTION
button until the desired
option is lit.
NOTE: To protect your
garments, not every wash/
rinse temperature, spin
speed, soil level, or option
is available with every
cycle.
16

OPERATING THE WASHER

❺ Press the START/PAUSE button to begin
the cycle. The door will latch, the
display will change, and the
washer will calculate the
estimated time remaining. Once
the washer has calculated the
estimated total cycle time, the washer will
start. To pause the cycle at any time, press
START/PAUSE.
NOTE: The cycle time displayed may
appear much longer than that of a
toploading washer. The displayed time is for
the complete cycle, rather than just the
agitation portion of the cycle, as is typically
shown on a top-loading washer.
NOTE: If the temperature in the washer is
too high, the door cannot be unlocked until
the washer has cooled. If the water level is
too high, select the DRAIN & SPIN to drain
excess water. Do not try to force the door
open.
❻ When the load is finished, the beeper (if set)
will sound and the door will unlock.
Remove damp clothes from the washer
immediately. Check under the door seal for
small items.