Troubleshooting; My Veet Infini'silk™ Pro Does Not Start; A Light Pulse Is Not Emitted When I Press The Pulse Button - Veet Infini'Silk Pro Manual Del Usuario

11. Troubleshooting

11.1. "My Veet Infini'Silk™ Pro does not start."
Make sure the POWER ADAPTOR is properly connected to the Veet Infini'Silk™ Pro device.
Make sure the POWER ADAPTOR is plugged into an electrical outlet on the wall.

11.2. "A light pulse is not emitted when I press the PULSE BUTTON"

Make sure that the READY INDICATOR LIGHT is blinking to ensure you have good
contact with the skin and that the TREATMENT SURFACE is evenly and firmly pressed
to the skin. For your safety, the PULSE BUTTON will activate a pulse only if the
TREATMENT SURFACE is firmly pressed against the skin.
• Check the SKIN TONE WARNING INDICATOR LIGHT. If it blinks, this is an indication that
your skin tone, measured by the SKIN COLOUR SENSOR, is too dark for safe application.
Try using the device on a different body part or contact RB Consumer Relations.
• Check the REPLACE CARTRIDGE INDICATOR LIGHT. If it is on, disconnect Veet
Infini'Silk™ Pro and replace the LAMP CARTRIDGE.
• Make sure that the READY INDICATOR is on.
• If within 10 seconds the READY INDICATOR remains off turn Veet Infini'Silk™ Pro off
and back on by pressing the ON/STBY SWITCH twice.
• Check the SYSTEM WARNING INDICATOR LIGHT.
• If the light is on turn Veet Infini'Silk™ Pro off and back on by pressing the ON/STBY
SWITCH twice.
If the problem persists, contact RB Consumer Relations UK – 0845 769 7079
ROI: 01 661 7318 or visit www.veet.co.uk
Do not attempt to open or repair your Veet Infini'Silk™ Pro device.
22
All manuals and user guides at all-guides.com