Battery Pack - Wacker Neuson PAL 450 Manual De Operación

All manuals and user guides at all-guides.com
Maintenance
3.4

Battery Pack

See graphic: wc_gr004602
To replace the alkaline batteries, or to charge the NiCd pack, first
remove the battery pack. The NiCd pack must be charged before first
use.
Removing the Battery Pack
3.4.1 Press the battery unlock button -- see (1) in the graphic above.
3.4.2 Supporting the battery, press the battery release (2) to remove it.
A) Battery Replacement
3.4.1 Raise the battery cover release to remove the battery cover.
3.4.2 Insert 4 D batteries. The insertion direction of the batteries is indicated
on the battery pack.
3.4.3 Attach the battery cover, inserting the guide lips into the guide slots.
B) Recharging (optional NiCd pack)
3.4.1 Remove the charging connector cap on the battery pack and plug in
the charger.
3.4.2 Plug the charger into an electrical outlet. A red light on the charger
indicates that it is charging.
wc_tx000807gb.fm
EN-17
PAL 450
wc_gr004602