EHEIM 6064 230V AC Instrucciones De Uso página 12

• Without fail, observe the operating instructions of the
other C0
4. Operating Principle
The C02 supply for aquarium plants can be controlled automatically with the EHEIM
C02 solenoid valve:
A 6064 (230V AC):
The C02 supply is switched off overnight by a timer switch*.
Connect the solenoid valve that controls the aquarium lighting to the timer
switch*.
B 6064 (24V DC):
With a timer switch* that controls an EHEIM powerLED+*.
*Not included in the scope of supply
5. Installation Example
a CO
A
2
d CO
2
unit, for example, a diffusor g timer switch
a CO
B
2
d CO
2
unit, for example, a diffusor g timer switch h EHEIM powerLED+ i EHEIM
power supply unit j EHEIM Y-distributor.
6. Assembly
Before starting the installation work, without fail take note of the operating
instructions of the other C0
• Fit the solenoid valve to the C0
the installation example A or B. In doing so, pay attention to the direction of flow.
See the arrows on the housings.
• With the union nuts, secure the C0
Fit the C0
valve and the C0
the direction of flow, see the arrow on the housing.
Use only original EHEIM C0
installation. Unsuitable hoses may burst.
components.
2
storage cylinder b CO
solenoid valve 6064 (230V AC) e CO
storage cylinder b CO
solenoid valve 6064 (24V DC) e CO
hose of the C0
2
2
non-return valve in the hose installation between the solenoid
2
feed unit (for example a C0
2
pressure reducer c Special hose CO
2
pressure reducer c Special hose CO
2
components.
2
fertilizer system in accordance with
2
hose to the hose connections of the solenoid valve.
-Safe Ø 4/6 mm hoses for the complete hose
2
12
non-return valve f CO
2
non-return valve f CO
2
diffusor). Pay attention to
2
-Safe
2
feed
2
-Safe
2
feed
2