GBS Elettronica Puma Instrucciones Operativas página 3

All manuals and user guides at all-guides.com
SET— For you start to set up the universal remote control.
Learn—Used to setup learning functions.
Light Lets you control the touch screen back light.
TV、VCR、CBL/SAT,DVD、—Let you select the device you
want to control.
POWER—Turns the device on and off .
0-9—The number keys operate the same as on your original
remote control, and maybe also used for
entering device codes when set up.
ENTER— Works like as the entering on your original remote.
TV/AV— Works like the TV/Video key on your original TV
remote, and TV/SAT key on your original
satellite remote A.B in cable and CD modes.
MENU —Works like the Menu or OSD (on-screen display) or
Memory key on your original remote
control.
CH± —Works like the Channel Up and Down keys on your
original remote control.
VOL± —Control the volume like the Volume Up and Down on
your original remote control.
Mute To mute the sound
REW（fast reverse）
PLAY (operate your DVD, CD etc)
FFWD (fast forward)
REC (Record)
STOP (terminating your operation)
PAUSE
，OK，EXIT Works like as the
UP，DOWN，LEFT，RIGHT，OK，EXIT Keys
on your original remote control for menu function .
RED，GREEN，YELLOW and BLUE: for TV Fast Text.
Television video
TV and text mixed
Teletext mode
Page hold
M1,M2, Lets you make sequent operation for you home
theater.
Set up
Make sure that 3 new batteries have been inserted correctly
into your new universal remote control unit.
To make your remote control ready for use, you need to carry
out one of the following steps:
A. Set up by Brand Code
1. Switch on the device, which you would like to control (e.g.
TV set).