Speedaire 22UX55 Introduccion De Funcionamiento Y Piezas Manuales página 7

Speedaire Operating Instructions and Parts Manual
®
Speedaire
SPUR GEAR REDUCERS INSTRUCTIONS
General Information:
When ordering parts or requests for information, the
product nameplate has all information required. It also
has the type of lubricant required for unit.
Product Use Criteria:
Speedaire Air Gear Motors are
not self-locking. If the application requires a brake for
Spur Gear Reducer Specifications
Model
Speed Range(Reducer
Output Shaft)
Gear Reduction
Maximum Allowable
End Thrust With Zero
Overhung Load.
(Reducer Output
Shaft)
Maximum Allowable
Overhung Load With 100 lbs/45.4 kg at 333 RPM to 200
Zero End Thrust.
(Reducer Output
Shaft)
Use SAE #10 Air Tool Oil to lubricate it.
Remove the plugs and add oil to the filling hole until the oil scale hole
Lubrication
overflows for horizontal operation. Refer to fig. 6.
Oil Scale Hole
Rotary Vane Air Gear Motor
22UX55
33.3 to 400 RPM
15︰1
100 lbs/45.4kg
lbs/90.8 kg at 33.3RPM
Filling Hole
7
safety, please contact your Speedaire Representative. It
is always recommended to Check the oil level in the
gear box to make sure it is filled to the proper level.
Loss of performance, Damage, or Failure can happen if
the oil level is low.
22UX82
30 to 300RPM
10︰1
200 lbs/90.8 kg at 300 RPM
200 lbs/90.8 kg at 300 RPM to 600
lbs/272.4 kg at 30RPM
Fig. 6.
22UX55, 22UX82
E
N
G
L
I
S
H