Kohler K-14402 Manual Del Usuario página 5

Seal Hole
3. Install the Drain - Style A
Disassemble the drain components.
Remove the protective material from the flange.
Wrap the bottom 2/3 of the flange threads with three layers of
sealant tape.
Apply a ring of plumbers putty or other sealant to the underside
of the flange according to the putty manufacturer's instructions.
Insert the flange into the lavatory drain hole.
Assemble the gasket (tapered side up) and washer to the flange
and partially thread the nut to the flange. Do not fully tighten the
nut at this time.
Install the body washer and drain body with the seal hole facing
the back of the lavatory and tighten.
Ensure the seal hole is facing the back of the lavatory and fully
tighten the nut. Use care to avoid scratching the finish.
Kohler Co.
All manuals and user guides at all-guides.com
Flange
Apply
Plumbers
Putty.
Washer
Gasket
Body
Washer
Nut
Body
5 1032026-2-C