Formatting the Player
WARNING! Do not format this player unless it stops working and you are
instructed to do so by technical support personnel.
1. Use the USB cable to connect the
player and the computer.
2. Double click on My Computer, then
right click "MTP Player", "MMP8564",
"MMP8567" or "Removable Disk" and
left click on "Format".
3a. For "MTP Player", "MMP8564" or
"MMP8567", at the "Format" window,
click OK to confirm and the player will
start to format (see figure to the right).
When finished, click "OK" to close the
Format window.
3b. For
"Removable
"Format" window, select "FAT 32" from the file system pull-down menu,
then click "Start" to format the unit (see figure above).
NOTE: Make sure you have selected "FAT 32" at the file system pull-down
menu; otherwise, after formatting, the player will not work properly. Then,
click OK to confirm and the player will start to format. When finished, click
"Close" to close the Format window.
All manuals and user guides at all-guides.com
FORMATTING THE PLAYER
Disk",
at
1.89GB
the
52
"MTP Player" or
"MMP8567"