AEE SPARROW 360 Guia De Inicio Rapido página 4

9 FLIGHT
1. Flight Environment
Indoor environment with minimal air movement.
Indoor flight:
• The Optical Flow Positioning function needs distinguishing pattern below flying area for better positioning performance.
• An indoor flight requires adequate light (illuminance > 15lux), like normal fluorescent lighting.
• No strong Wi-Fi interference allowed.
• Recommended flight range: less than 98 feet (30 meters) distance, less than 32 feet (10 meters) height.
2. Prefl ight Checks
• Check if the drone has any structural damage.
• Check the battery level of the drone (refer to the battery level icon on the APP).
• Check the battery level of the mobile phone. Should be >20%.
3. Preparations for Flight
a. Prepare Drone: Keep the drone in horizontal condition
(Note: Once install the battery, the flash LED will slowly flash. it will turn off when the APP is connected to the drone. If the APP is not
connected to the drone within 10 minutes, the battery will cut off the power by itself. You should reinstall the battery.)
b. Adjust the camera's pitch angle:
As shown in the illustration below, the camera supports 5 pitch angles
1) 0° the lens faces the front
2) 15° in elevation (push the lens up)
3) -30°,-60°, or -90° in depression (push the lens down)
Note: Adjust the camera pitch angle before taking off.
c. Power on the Drone: Long press the power switch for 3s until the red power indicator is turned on.
4. Start the Flight
• Take Off / Landing
Tap the quick take off/landing icon , and the Drone will take off to the 4 feet (1.5 meters) altitude. Tap the icon again, and the drone
will land to the ground.
• Flight Control Mode
- Joystick Mode
UP FORWARD
LEFT RIGHT
DOWN BACK
- Motion Mode
Tap the remote control icon , select motion mode, tap and hold the motion button and tilt the mobile phone forward, backward, left
or right to control the Drone to fly forward, backward, left or right. Slide the motion button up/down to increase/reduce the altitude of the
Drone. Slide the motion button left/right to change the yaw.
• Other Control Modes
The drone is in the direction of the nose with the side of the power switch. User can choose headless mode or head switch mode.
-
Headless Mode: In default, the Power On button is the Nose and camera is the Tail. In Headless Mode, no matter which direction the
drone is facing, Fly-Forward-Direction is Nose and Fly-Backward-Direction is Tail.
- Head switch Mode: Press the icon,nose and tail to make a turn.
Left Joystick: "Up-Down" controls Climb and Descent, "Left-
Right" controls Yaw.
Right Joystick: "Up-Down" controls Roll, "Left-Right" controls
Pitch.
Motion operating button
5. Start shooting/recording
The drone supports 4 recording modes:
• Single shot: tap to shoot one photo
• Normal video: tap to start/stop recording the video
• Short video: tap to record a 12s video
• Rotary camera: tap to rotate the heading clockwise by 360°, throughout which process, the camera keeps recording the video.
10 SHARING
Enter CAMERA LIBRARY, select the photos/videos to be shared and tap DOWNLOAD. Disconnect the mobile phone from the drone's Wi-Fi hotspot
and connect it to your data tra c network or Wi-Fi network. Tap the Library icon on AEE ZONE and select the photos/videos to be shared.
1. Open AEE ZONE and enter Sparrow interface. Tap LIBRARY icon.
2. Select CAMERA LIBRARY.
3. Select the target photos/videos and download them onto your mobile phone as shown, Tap "Done".
4. Disconnect the Mobile Phone from the drone's Wi-Fi connection, and connect it to your regular Wi-Fi Network or Cellular Mobile Network.
5. Enter LOCAL LIBRARY, select the photos to be shared and tap the SHARE icon "
6. Select the Social Media icon (Facebook, Instagram..., etc.) of your choice to share the photos.
11 AIRCRAFT NOTES
1. Use the drone in Indoor environment with minimal air movement. Recommended flight range: distance less than 98 feet (30meters),
height less than 32 feet (10 meters).
2. Disable the IR Sensor Button when fly in a narrow space.
3. If the image received from drone is displayed on your phone intermittent or delayed, restart the APP.
4. Do not insert fingers or any objects into the drone housing when operating..
5. When installing the battery or powering on the drone always have the drone on a horizontal surface. Avoiding holding in your hand when
inserting the battery or power on the drone.
6. Start the APP upon successful Wi-Fi connection. If no image is displayed on your phone after 20 seconds, completely shut down the APP
and restart the process again.
7. In Headless Mode, the operator is not recommended to change position frequently.
8. To use the Video/Photo function, a Micro-SD card must be inserted before powering On the drone.
9. If the power indicator flashes slightly after powering on the drone and connecting it to the APP, calibrate the drone.
10. Calibrate the drone if it deflects or shakes in the flight.
11. The Motion Mode can be enabled only after the drone takes off.
12. No flight is allowed in extreme weather conditions, even in an indoor environment (the drone tends to unstable in extreme weather
conditions where the barometric pressure used to determine the altitude is changed).
" at the lower right corner as shown in figure 5.