AIPTEK DaVinci DVB-T Manual Del Usuario página 11

System settings (continued)
Main item
Configuration
Software Upgrade
Factory Default
Version
Sub item
Time: Enable/Disable clock on the TV screen.
OSD Timeout: Set OSD display time.
Display OSD Transparency: Set OSD transparency.
setting Language: Set OSD language.
1st Audio Language: Set 1st audio language.
2nd Audio Language: Set 2nd audio language.
Display Mode: Set TV system to PAL or NTSC.
Aspect Ratio: Set aspect ratio to 16:9, 4:3LB, or 4:3PS.
Brightness: Set TV screen brightness.
TV
Contrast: Set TV screen contrast.
Hue: Set TV screen hue.
Saturation: Set TV screen saturation.
EQ Setup: Set EQ setting.
Sound Effect: Set sound effect.
Display OFF: Set if turn off the LCD backlight when
System playing music.
Setup Transitions: Enable/Disable slideshow effects.
LCD Brightness: Set LCD backlight brightness.
Area: Set your location for scanning channels. Note that
incorrect area setting will result in blank channel table.
Time Set date and time.
You can save new software in the memory card and
upgrade firmware from the card.
Important note: Make sure the AC power is provided
Download
or the battery power is enough for at least 30
from SD
minutes of usage. DO NOT shut down the product
while upgrading in progress, or it is likely to be
seriously damaged and require factory service.
Restore factory default settings.
Note: The channel table will become empty. You
Yes/No
need to rescan TV/radio channels to access the
programs.
- Show version information.
Description
10