Ultra-Light
following figures and section 1.2 Symbols in this manual, page
5 ).
1.
Using the front and rear straps of the 4-point restraint system,
secure the wheelchair to the vehicle mounted rails. Refer to
the user manual supplied with 4-point restraint system.
40
Front side tie-down positions for belt straps:
1.
Attach the front straps above the castor supporters as shown
in the two figures above (see location of the attachment
labels).
2. Attach front straps to the rail system referring to best practice
recommended instructions from the safety belt manufacturer.
3. Release parking brakes and apply tension front straps by
pulling the wheelchair backwards from the rear.
4. Re-apply parking brakes.
1583566-C