Siefken grind DÄMON GD1825 Instrucciones De Uso página 22

3 YEARS
L I M I T E D WA R R A N T Y
c) Do not position your body in the area where power tool will move if kickback occurs. Kick-
back will propel the tool in direction opposite to the wheels movement at the point of snag-
ging.
d) Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the
accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory
and cause loss of control or kickback.
e) Do not attach a saw chain woodcarving blade or toothed saw blade. Such blades create
frequent kickback and loss of control.
IMPORTANT: Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting accessory con-
tacting a "live" wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
SAFETY
a) Only use our recommendedsanding wheelsand the specially-designed safety guard for the
wheels. It will be dangerous and could not protect your safety if using other sanding wheels
which aren't designed for power tools.
b) The safety guard must be stably xed onto the tool and adjusted into the best position, only
expose the minimum part of the wheel in front of the operator. The safety guard will protect
the operator from being hurt by the exploded sanding wheels or incidentally touching the
wheels.
c) Only use the wheels limited to our recommended usages. For example, never grind or cut by
the side part of the cutting wheel. The pressures applied on the side part of the wheel may
make it damage
5