Siefken grind DÄMON GD1825 Instrucciones De Uso página 26

3 YEARS
L I M I T E D WA R R A N T Y
Switching on/o
Please make sure the machine is shut o and the switch can be freely reset before connected
to power.
For tool with lock-on switch
To start tool, hold Trigger B. Release Trigger B to stop. For continuous operation, hold Trigger B
and push Trigger A. To stop tool in hold position, press trigger and release.
For tool with lock-o switch
To start tool, push trigger A and then hold trigger B. Release trigger B to stop.
PICTURE 6
E ective and Safe Grinding and Cutting Methods
- Please use the correct part of the emery wheel, otherwise it is easy to be damaged.
- The users can get satis ed e ects if the users give 1/2 strength compared with the own
weight of the tool. Over strength is easy to make the tool engine and emery wheel damaged
because of overload.
- Generally speaking, please keep the grinding and cutting part of the emery wheel and disc in
the scope of 15 to 30 degree with the surface of processing object.
9